Schwarzbeck

Schwarzbeck is a leading manufacturer specialized in Antenna's, Clamps, lisn's and more EMC measurement tools.
Below you find a list of Schwarzbeck antenna’s. Please contact us for more information on the antenna’s or other Schwarzbeck products.

antenna selection

 

Typ

 

Antennas

 

 

Antenna Holders / Baluns

VHA 9103 B

Holder / Balun without telescopic dipole elements (for use with Biconical BBA 9106, BBAL 9136, BBAK 9137, BBVK 9138, FBAB 9177)

HFBA 9122

HF-VHF Broadband balun / holder (0.1) 0.15 - 300 (500) MHz especially to measure very high field strength, biconical elements BBAK, BBVU 9135 or BBUK 9139 required

VHBA 9123

Antenna Holder / Balun for Bicon. Broad Band Antenna (e.g. BBA 9106, BBAL 9136, BBAK 9137), 50 / 200 W, (better antenna factor below 50 MHz, also EMV application 100 W

VHBB 9124

Antenna Holder / Balun for Bicon. Broad Band Antenna (e.g. BBA 9106, BBAL 9136, BBAK 9137, BBVK 9138, FBAB 9177, FBAL 9178), 50 / 200 W, (better antenna factor below

VHBC 9133

Antenna holder / balun 50:200 W, 1 kW, for biconical or collapsible elements (BBA 9106, BBAL 9136, BBFA, Triangle, FBAA, FBAB, FBAL 9178)

VHBD 9134

High power antenna holder / balun 50:200 W, 2.5 kW, 20-200 MHz for biconical or collapsible elements BBFA 9146, N-connector

VHBD 9134 OPT 7/16

Option: 7/16 connector

UBAA 9114

Broadband Balun/Holder 4:1, 30-1000 MHz, 5 W, low loss, BBVU 9135, BBUK 9139, BAOC 9216 or BBOC 9217 elem. Required

UBAA 9115

Broadband Balun/Holder 4:1, 30-1000 MHz, 5 W, extremely high symmetry, BBVU 9135, BBUK 9139, BAOC 9216 or BBOC 9217 elem. Required

 

Biconical elements

BBA 9106

Biconical Elements, 30-300 MHz, requires VHA 9103 B, VHBC, VHBB or VHBA

BBAL 9136

Biconical Elements, 20-200 MHz, requires VHA 9103 B, VHBC, VHBB or VHBA

BBAK 9137

Biconical Elements, 45-450 MHz broad band, requires VHA 9103, VHBB or VHBA

BBVK 9138

Biconical Elements, 60-600 MHz broad band, requires VHA 9103, VHBB or VHBA

BBVU 9135

Biconical Elements, (30)100-1000 MHz (like VUBA), for UBAA 9114/9115

BBUK 9139

Biconical Elements, 160-1200 MHz broad band (like UBA), for UBAA 9114/9115

 

Collapsible or open Conical elements

BBFA 9146

Large collapsible aluminium Elements with extensions up to 4 m

FBAB 9177

Collapsible Biconical Elements 30 – 300 MHz (instead of BBA 9106)

FBAL 9178

Large Collapsible Biconical Elements 20 – 200 MHz (instead of BBAL 9136)

BAOC 9216

Open Conical Elements, 160-1200 MHz broad band, for UBAA 9114/9115

BBOC 9217

Open Conical Elements, (30)100-1000 MHz broad band, for UBAA 9114/9115

 

Biconical Antennas

SBA 9113

Small Biconical Microwave Antenna 0.5 – 3 GHz, 20 W

SBA 9112

Small Biconical Microwave Antenna (1) 3 – 18 GHz, 10 W including transport case.

UBA 9116

Biconical UHF broad band antenna (160) 300 -1000 (1100) MHz

VUBA 9117

Biconical VHF-UHF broad band antenna (30) 150 -1000 MHz

 

Dipoles

VHA 9103

VHF Half-Wave Dipole with 2 sets of telescopic elements, 30-300 MHz

UHA 9105

Tuneable UHF – Half – Wave Dipole, 300 – 1000 MHz w. telescopic elements

UHA 9125 C

Tuneable UHF – Half – Wave Dipole with EMI – Balun, 0.75 – 2 GHz with 4 sets of elements, LE = 180, 140, 100, 80 mm.

UHA 9125 D

Tuneable UHF – Half – Wave Dipole with EMI – Balun, 1.0 – 3 (4) GHz with 6 sets of elements, LE = 140, 114, 90, 72, 60, 48 mm

 

Precision Dipoles

VHAP

VHF Precision Dipole 30-300 MHz, 2 sets of telescopic elements (mostly required in pairs)

UHAP

UHF Precision Dipole 300-1000 MHz (VHAP & UHAP mostly required in pairs)

CCA

Carrying and storing case for 2 x VHAP or 2 x UHAP, cases for other antennas also available.

VHAPA

Calibration adaptor for VHAP Precision Dipoles

UHAPA

Calibration adaptor for UHAP Precision Dipoles

 

Active Antennas

VAMP 9243

Vertikal active rod antenna, 9 kHz - 30 MHz, BNC, reduced noise floor, with mounting nut for AM 9144 and rechargeable battery.

VAMP 9243 Opt. GP

Option: Aluminium-Groundplane, 0.6 x 0.6 m

VAMP 9243 Opt. ACS 410

Option: Charger ACS 410

Vamp 9243 Opt. VT

Option 20 dB plug in divider to measure high field strength

EFS 9218

Active Electric Field Probe with Biconical Elements, 9 kHz - 300 MHz, 12 µV/m - 65 V/m, const. antenna factor typ. 46 dB/m high symmetry, built in rechargeable battery

EFS 9218 Opt. ACS 410

Option: Automatic charger ACS 410 for EFS 9218

EFS 9218 Opt. VV

Option: built in broadband preamplifier. Antenna factor 20 dB/m, disengageable.

EFS 9219

Active antenna holder, high sensitivity (1 µV/m … 3 V/m), 9 kHz-30 MHz, BBUK 9139 biconical elements required.

EFS 9219 Opt. Rohr

Option: Isolating tube with braid chokes for EFS 9219

EFS 9219 Opt. ACS 410

Option: Automatic charger Ansmann ACS 410 for EFS 9219

IABF 9216

Isotropic field strength measurement unit for use with spectrum analyzer or receiver, 9 kHz – 3 GHz.

IABF 9216 Opt. Haube

Option: Weather protection cover

 

Passive Antennas

VPMP 9242

Vertical passive rod antenna, 10 - 40 MHz, possible rods: FBAB 9177, FBAL 9178, BBA 9106, BBAL 9136 ( have to be ordered extra)

VPMP 9242 Opt. GP

Option: Aluminium groundplane 0.6 x 0.6 m

 

Passive Magnetic Antennas, TX-Loop Antennas

HFRA 5148

Circular Transmitting Loop Antenna diam. 180 mm, 1 turn

HFRA 5150

Transmitting Loop Antenna w. broad band transformers and 50 Ohm load 5 W included (with external dummy load max. 100 W), size 0.6m x 0.6 m, 9 kHz – 30 MHz, 3/8” camera thread

HFRA 5151

same as model 9150, but reduced size 0.45 x 0.45 m

HFRA 5152

Circular Transmitting Loop Antenna diam. 250 mm, 0-3 MHz, 1 W

HFRA 5153

Circular Transmitting Loop Antenna diam. 180 mm, 0-20 (30) MHz, 5 W

HFRA 5154

Circular Transmitting Loop Antenna diam. 100 mm, 0.1 – 30 MHz, Transformer 50 Ohm, 0.5 W

HFRA 5155

Circular Transmitting VHF – UHF loop antenna, diam. 50 mm,

HFRA 5156

Circular Transmitting Loop Antenna diam. 50 mm, 0-5 MHz, 2 W, 10 turns

HFRA 5157

Circular Transmitting Loop Antenna diam. 50 mm, 0-20(30) MHz, 3 W, 2 turns

HFRA 5158

Circular Transmitting Loop Antenna diam. 180 mm, 0-2 MHz, 5 W, 10 turns

HFRA 5159

Circular Transmitting Loop Antenna diam. 250 mm, 0-0.5MHz, 5 W

HFRA 5170

Cal. Loop 3 W, diam. 100 mm, 0-30 MHz, 1 turn, 250 Ohm

 

Passive Magnetic Antennas, RX-Loop Antennas

HFRAE 5160

Receiving VHF – UHF loop antenna, diam. 50 mm, 2-300 MHz, Transformer

HFRAE 5161

HF RX Loop, diam. 100 mm, 70 k-120 MHz, 1 turn, Transformer

HFRAE 5162

VLF-HF RX Loop, diam. 250 mm, 50 k-30 MHz, 1 turn, Transformer

 

CISPR 15 3-dimensional loop antenna van Veen

HXYZ 9170

3-dimensional large loop antenna, diam. 2 m, acc. EN 55015 / CISPR 15, Socket and Coaxial switch recommended

HXYZ 9170 Sockel

Socket and mounting equipment for large loop HXYZ 9170

HXYZ 9170 Umschaltbox

3 in one coaxial switch for manual / remote operation including cable set (3 BNC cables with braid current blockers) for large loop HXYZ 9170

HFCD 9171

Calibration Balun / Dipole for HXYZ 9170 (recommended accessory: AM 9144)

 

Active Loop Antennas / Magnetic Field Probes

FMZB 1516

Loop Field Strength Measuring System, works with EMI Rcvrs. Analyzers 9 kHz – 30 MHz, constant antenna factor of 20 dB(1/m), mains operated.

FMZB 1516 Opt. Akku

Option: Built-in rechargeable battery pack and automatic charger

HMDA 1545

Handheld magnetic field meter, LCD, acustic fieldstrength indication with tone generator, 9 kHz- 50 (80) MHz, 200µA/m … 1 A/m, 6 x Type AA NiMH.

HMDA 1545 Opt. ACS 410

Option: ACS 410 charger for HMDA 1545

HFS 1546

Active magnetic Field Probe with shielded 53-mm-Loop, 150 kHz – 400 MHz

FMZB 1517

Calibrated hand-held Magnetic Loop Antenna, 9 kHz – 30 MHz, 150 mm diam. for EMI Rcvrs. (measures H-field, fictive E-field level up to 20 V/m (53 mA/m), 20 dB/m Antenna Factor)

FMZB 1527

Calibrated hand-held Magnetic Loop Antenna, 9 kHz – 30 MHz, 150 mm diam. for EMI Rcvrs. max. fictive E level 150 V/m (0.4 A/m), AF: 40 dB/m

FMZB 1537

Magnetic field meter 9 kHz – 30 MHz, requires either EHMG 1623 or UEW 9210 with EMI-Receiver / Analyser, max. fictive E level 75 V/m (0.2 A/m),

FMZB 1538

Magnetic field meter 9 kHz – 30 MHz, max. fictive E level 75 V/m (0.2 A/m), separate power supply cable.

FMZB 1547

Magnetic field meter 9 kHz – 30 MHz, 20A/m, requires UEW 9210 with EMI-Receiver / Analyser

FMZB 1548

Magnetic field meter 9 kHz – 30 MHz, 20A/m, with separate power supply cable

UEW 9210

DC separator for coaxial power supply of probes FMZB 1537, FMZB 1547

SNUE 9211

AC/DC Adaptor / Power supply 220V AC/15V DC for UEW 9210, 3.5 mm jack

HMG 1621

Handheld magnetic field meter 5 Hz – 10 kHz, 0.003 ... 30 A/m, requires probe

HMG 1621 Opt. Sonde 5

Option: Probe 5 Hz – 10 kHz for HMG 1621

HMG 1621 Opt. Sonde 50

Option: Probe 50 Hz – 10 kHz for HMG 1621

 

Latest News

twitteryoutube

jun-2017
EM Test New ESD Simulator

NX 30 - New 30kV ESD Simulator with Bleed-off function.
more...


EM Test Surge Generator for Solar Panel testing
New vSurge NX 20
more...


3-phase Power Sources from EM Test
Netwave Series
more...


MPE - World First Gb Ethernet Filter
Low-Pass EMI Filter
more...


Rental solutions for EMC instrumentation
Accelonix Rental Service
more...


05-may-2017
Accelonix at E&A 2017
Accelonix exhibiting at Electronics & Applications 2017.
May 30 May to June 1th, Jaarbeurs Utrecht.


22-feb-2017
TestWay Seminar

DFx Software Tools to Optimize PCBA Manufacturing & Test Strategy.
April 4, Eindhoven


08-feb-2017
Yxlon FeinFocus

Non-Destructive X-ray Inspection Technology for Electronics.
more...


01-feb-2017
Aster twSystem

New system level PCB viewer.
more...


26-jan-2017
Hesse New BJ 955/959

New Bonder platform for Manual and Automated Heavy Wire Bonding.
more...


18-jan-2017
Akrometrix

Thermal Warpage & Strain Metrology Measurement Systems.
more...


27-nov-2016
CyberTECHNOLOGIES
Non-Contact 3D Surface Metrology Measurement Systems.
more...


15-nov-2016
TPT Wire Bonding Workshop
Learn about Wire Bonding and discover the TPT Solutions during this Free Workshop!

 


sep-2016
XRH Count
Revolution in automatic, contactless SMT component counting!
more...


june-2016
FEE EMC Seminar
Thank you for visiting us in St-Katelijne-Waver


may-2016
Teseq ITS 6006B
Radiated immunity test system up to 6GHz, Second Generation released
more...



Teseq NSG 4070B
RF immunity test system up to 1GHz. Now also supports draft version (2015) of ISO 7637-4
more...



Teseq NSG 4060
Meets new immunity testing requirements range 15kHz-150kHz
more...



MPE Plug-in Tempest Filters
Protect your IT systems with this range of convenient, plug-in TEMPEST filters
more...


mar-2016
Accelonix BV has moved!
Accelonix has moved to a new office space since March 12th 2016
more...


jan-2016
Data I/O LumenX
Data I/O Ultra-Fast eMMC Programming!
more...


Accelonix News Archive